 |
 |
 |
 |
| |
 |
|
|
| |
|
|
| |
One Piece Design Full Port Screwed End 150 / 300 LBS Rating
|
|
 |
Construction :
One Piece full part, blow-out proof stem, floating bass, soft seated, Non fire safe design, lever operated ball valve
Manufacture Std. : BS 5351
MOC : SS304, SS316, CS & CI
Testing Std. : BS 5146
Screwed Ends : BSP / BSPT / NPT Female Threads
|
| |
|
|
| |
|
|
Three Piece Design Full Port Screwed / Socketweld End 150 / 300 LBS Rating |
|
 |
Construction :
Three Piece full part, blow-out proof stem, floating bass, soft seated, Non fire safe design, lever operated ball valve
Manufacture Std. : BS 5351
MOC : SS304, SS316, CS & CI
Testing Std. : BS 5146
Screwed Ends : BSP / BSPT / NPT Female Threads
|
| |
|
|
| |
|
|
| Three Piece Design Full Port Flanged End ANSI 150 LBS Rating |
|
 |
Construction :
Three Piece full part, blow-out proof stem, floating bass, soft seated, Non fire safe design, lever operated ball valve
Manufacture Std. : BS 5351
MOC : SS304, SS316, CS & CI
Testing Std. : BS 5146
ENd Connection : Flanged as per ANSI B16.5 RF |
| |
|
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
Ball Steam Traps |
|
 |
1. High thermal efficiency at both light and heavy loads. Continuous modulating discharge does not create pressure disturbances, which may affect control in air heating coils, shell-and-tube exchangers, etc.Stainless steel internal working parts increase service life.
2. Stainless steel internal working parts increase service life. |
| |
|
|
| |
|
|
T-B Steam traps |
|
 |
1. In-line horizontal piping connections simplify installation and maintenance.
2. All internal parts can easily be renewed without disturbing the pipe connections.
3. Steam loss is eliminated because during operation, the main valve is always seated by condensate.
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
General Purpose Gauges |
|
 |
| These gauges are ideal for measuring Air, Oil Gases and Liquids that are not corrosive to copper, oil and steel. These are best for used in general Industrial Applications such as Boilers, Pumps, Compressors, Machinery's, Process S Chemical Plants. Case and Bezel is drawn steel with black finish and is available in Bottom, Back Connection, Direct Mounting, Surface Mounting and Flush Panel Mounting. These are available in all standard process connections NPT, BSP etc. It possesses Accuracy of ± 2% and is available in Dial Sizes of 40, 50, 63, 80,100,150 and 250 mm. |
| |
|
|
| |
|
|
Diaphragm Type Gauges |
|
 |
| These gauges can be used for corrosive gases and liquids. Diaphragm Material is made with Stainless steel and Teflon protection. The Case Material is of pressure die cast aluminum, steel or stainless steel in addition to the Wetted parts of Stainless Steel, Mild Steel which is available in all standard process connections NPT, BSP etc. It has accuracy of ± 1 % and has the dial Size of 100 mm and 150 mm. Pressure Ranges from 40 millibar to 600 Millibar and 0-1 kg/cm2 up to 0.21 kg/cm2. |
| |
|
|
| |
|
|
| Industrial Gauges |
|
 |
| These gauges work best for Chemical and Fertilizer Plants, Refineries, Power Stations, as the gauges are installed outdoors. We offer Measuring System of Phosphor bronze, Brass, SS 316 or Monel. The Case of die cast aluminum with screwed bezel black finish or epoxy coated is also available. These are Weatherproof and dust proof Ip55 and have Accuracy ± 1 %. The Dial Size is 100,150 and 250 mm which are available in all standard process connections, Ranges from - 760 mmHg to 0 to 1000 kg/cm2 and Receiver Gauge Input Pressure is 3 to.15 psi OR 0.2 to 1 kg/cm2. |
| |
|
|
| |
|
|
| Low Pressure Capsule Type Gauges |
|
 |
| These gauges works best for measuring low pressure of non-corrosive gases, commercial heating, gas distribution and filtration. The measuring system of Brass or S3 304 Capsules and Case Material cast aluminum is available. These low pressure capsule type gaugesare available in pressure range 0.50 mm WC up to 1000 mm WC in pressure, vacuum and compound ranges. These are available in all standard process connections NPT, BSP etc; id dial sizes 100 mm and 150 mm with an accuracy of ±2%. |
| |
|
|
| |
|
|
| Mercury In Steel Type Thermometer |
|
 |
It is one of the most versatile and widely used devices in industrial temprature measurements.The entire assembly of bulb , capillary and gauge is calibrated directly changes. Technical Specifications Dial Size 4,6,8 and 10. Case and bezel SS 304 / Die- cast aluminium weather proof. Window sheet glass or Safety glass. Pointer micto zero or center zero adjustable. Model , Vertical, Horizontal, Capillary Type. Sensor / Stem Material SS 316 (Dia 6mm, 8mm, 10mm, 12mm, 14mm and 16mm). Connection 1/4, 3/8, 1/2, 3/4 and 1. BSP, NPT, Matrix Thread, Male / Female, adjustable/fixed. Range-30 to 550 C. Accuracy +- 1% of FSD. Over Range Protection 125% of FSD.
|
| |
|
|
|
|
| |
|
|
| |
|
|
|
 |
 |
 |
 |
|
 |
 |
