Audco - Butterfly Valve  
 
     
 

Slimseal Butterfly Valve

 
AIL SLIMSEAL is a Wafer type Butterfly valve, with an integrally molded elastomer body liner. Designed to outperform loose liners , SLIM Seal's elastomer liner is molded directly in the body bore and vulcanized in-situ, making it last the entire life of the valve.

The result - a valve that requires no form of maintenance. A perfect FIT AND FORGET valve.
     
     

Aquaseal Butterfly Valve

 
AIL-AQUASEAL wafer type butterfly valve, with an integrally molded elastomer body liner, is designed to outperform valves with loose liners.

The elastomer liner, molded directly in the body and vulcanized in-situ, ensures that the liner lasts the entire life of the valve.

A valve that requires no form of maintenance. An ideal FIT & FORGET valve.
     
 
   
     
 
Audco - Ball Valve  
 
     
 

Reduced Bore Ball Valves [Three - Piece Design]

 
This 3-piece Ball Valve is the most easily on-line maintainable in its class. By removing three body connector bolts and loosening the fourth, the body can be swung away using the fourth bolt as the fulcrum, to carry out any installation or maintenance operation on the valve, thus reducing down time.
     
     

Reduced Bore Ball Valves [Single - Piece Design ]

 
AIL Series AF51/52 Ball valves are single piece flanged ball valves. Antistatic and fire safe, these valves have excelled in the industry by finding themselves on some of the most arduous applications.
     
 
   
     
     
 
Normex - Ball type NRV  
 
     
 

Ball type Foot valve

 
This is a unique design foot valve which works excellently in muddy . clear water, sewage, waste water, viscous liquid, paper stock, slurries, etc. The commonly used flap type foot valve gives permanent problems like priming of the pump, clogging, breaking of the flap, etc. The ball type foot valve is especially designed to eliminate all these troubles. The problematic hinged flap is replaced by a free ball. A thick Nitrile seal gives perfect sealing.
   
     

Ball Type NRV

 
Normex non return valves are ideally designed to prevent undesired backward flow of Muddy, sandy & clear Water, Sewage, Waste water, Viscous liquid, Paper Stock, Slurry
   
     
Butterfly Valve  
Excellent flow control in quarter turn.
Compact saving design.
Bidirectional 100% tight shut off.
Low weight, low maintenance, long service life.
Easy automation/retrofit possible.
Stream lined valve disc for lower pressure drop.
Both shafts mounted in bearing supports for easy operating torques.
Replaceable/Bonded seat option.
Suitable for mounting between all standard flanges.
Gasket packing not required to install between flanges.
     
   
 
   
     
  Utam - Water & Steam Valves  
     
 

Gate Valve Pegular Type - UV-86-W

 
SCREWED  IN BONNET, INSIDE SCREW, NON RISING STEM, INTEGRAL SEAT, SOLID WEDGE. 
SCREWED FEMALE BSP ENDS & FLANGED ENDS TO BS: 10 TABLE 'D'
     
     

Spring Loaded Safety Relief Valve - IBR Certified

 
 
SCREWED MALE INLET ENCLOSED DISCHARGE
Max.Steam Working Pressure :  17.58 Kg/cm2g(250psig)
Hydraulic Test Pressure :  35.16 Kg/cm2g(500psig)
Maximum Permissible Temp.:  2250c.(4370F)
     
     
Vertical Check Valve  
Standard Pattern , Two Piece Design with Phos. Bronze or Stainless Steel Spring , Screwed Female  Ends B.S.P Parallel
     
     
Globe Steam Stop Valve : IBR Certified  
Bolted Bonnet outside screw & yoke type Renewable Seat Rising stem with Back Seat Arrangement, Full Flow Area, Hand Wheel Operated. 

Conforming to BS: 5152/ Din 86251
 
     
Name
 
Phone No
 
Email Id
 
Product Looking For
 
 
  
 
 
Home   |   About Us   |   Products   |   Blog   |   Enquiry   |   Contact Us   |   Sitemap
 
  © 2009 Industrial Tools Centre
Click to Visit Web Express India